TruXedo TruXport Tonneau Cover 248601
Our TruXedo TruXport Tonneau Cover 248601 combines affordability with proven bed protection for your truck. This soft roll-up cover features a low-profile design that sits flush with your truck bed rails, delivering sleek looks without sacrificing cargo access.
Engineered with a durable vinyl top and powder-coated aluminum frame, the TruXport 248601 installs in minutes without drilling and rolls up quickly when you need full bed access. We designed this cover for drivers who want daily weather protection, improved fuel economy, and the flexibility to haul oversized loads whenever the job demands it.
- Fits 2015-2020 Ford F-150 with 5’6″ bed (66.8″ bed length)
- Weather-resistant vinyl fabric with tear-resistant reinforcement
- Powder-coated aluminum bow and rail system for corrosion resistance
- No-drill clamp installation — mounts to bed rails in under 30 minutes
- Low-profile design sits just 1″ above bed rails when closed
Construction & Weather Protection
The TruXedo TruXport Tonneau Cover 248601 uses marine-grade vinyl fabric engineered to resist UV damage, abrasion, and tearing across years of daily use. We reinforce high-stress areas with double-stitched seams and bind the fabric edges to prevent fraying in extreme weather.
The powder-coated aluminum bow system provides rigid support without adding excessive weight to your truck. Each bow locks into place with snug-fitting side rails that create a weather-tight seal against rain, snow, and road spray. While no soft tonneau cover is 100% waterproof, the TruXport 248601 channels moisture away from cargo and keeps your bed dry in most driving conditions.
Clamp-On Installation Process
No-Drill Mounting System
We engineered the truxedo truxport tonneau cover 248601 with a clamp-on rail system that eliminates drilling into your truck bed. The side rails attach directly to your existing bed rails using adjustable clamps that tighten with a standard socket wrench. This installation method preserves your truck’s resale value and allows you to remove the cover completely if you sell the vehicle or change configurations.
Most owners complete installation in 20-30 minutes with basic hand tools. The package includes pre-assembled bow frames, so you’ll only need to position the rails, tighten the clamps, and attach the fabric cover to the bows. Each rail features front and rear adjustment points to ensure proper tension and alignment across the entire bed length.
Roll-Up Operation & Cargo Access
The TruXport 248601 rolls toward your cab when you need full bed access, bundling into a compact 10-inch cylinder that secures behind the cab with included hook-and-loop straps. This design gives you the flexibility to haul tall items like refrigerators, furniture, or building materials without completely removing the cover from your truck.
When closed, the dual latch system at the tailgate locks the cover in place and provides basic theft deterrence. We include two cylinder locks with keys, though motivated thieves can still cut through the vinyl fabric. The cover’s primary function is weather protection and visual security rather than high-security cargo containment.
More Soft Roll Tonneau Covers
What people are saying
TruXport 248601 Buyer Questions
Yes, the TruXport 248601 is designed to work with most factory and aftermarket spray-in bedliners. The side rail clamps adjust to accommodate the extra thickness of the liner material.
This specific model fits 2015-2020 Ford F-150 trucks with the 5’6″ short bed only. If your truck has a 6.5′ or 8′ bed, you’ll need a different TruXport model sized for your bed length.
Most truck owners complete installation in 20-30 minutes using a socket wrench or drill with a socket adapter. The process involves positioning the side rails on your bed rails, tightening the clamps, and attaching the pre-assembled bow frames to the fabric.
No drilling is required—the clamp-on rail system mounts directly to your existing bed rails. We include detailed instructions with diagrams, and many owners find the process easier than expected even without prior tonneau cover experience.
The TruXport 248601 is highly water-resistant but not 100% waterproof like hard tonneau covers. The vinyl fabric and rail seals keep your bed dry during normal rain and snow, but extremely heavy downpours or pressure washing may allow small amounts of water to seep through the tailgate area.
For maximum weather protection, we recommend the TruXedo Sentry CT hard rolling cover, which uses aluminum slats and industrial weather seals. The TruXport balances good weather resistance with the convenience and affordability of a soft roll-up design.
The TruXport 248601 is not compatible with bed extenders that attach to the bed rails, since the tonneau cover’s side rails occupy that mounting space. You’ll need to remove the cover to use most bed extenders.
Tailgate extenders that mount to the tailgate itself (without attaching to the bed rails) may work with the cover rolled up toward the cab. However, you cannot close the tonneau cover over a bed extender, as the rigid frame bows won’t accommodate the extra height.
Wash the cover every 4-6 weeks with mild automotive soap and water using a soft sponge or microfiber cloth. Rinse thoroughly and allow it to air dry before rolling up the cover.
Avoid harsh chemicals, bleach, or petroleum-based cleaners that can damage the UV-protective coating. Apply a vinyl protectant spray twice per year to keep the fabric flexible and prevent cracking. For winter storage, clean the cover thoroughly and store it in a dry location away from direct sunlight.
The TruXport 248601 does not accommodate fifth-wheel hitches or gooseneck ball mounts when closed, as the cover fabric sits low in the bed and cannot clear the hitch hardware. You’ll need to roll up or remove the cover when towing with a fifth-wheel or gooseneck trailer.
If you frequently tow with a fifth-wheel setup, consider a tri-fold or hard folding tonneau that allows partial bed coverage with the front panels removed. The TruXport works best for trucks used primarily for daily driving with occasional towing of bumper-pull trailers.
You’ll need a socket wrench set (or drill with socket adapter) to tighten the rail clamps—typically a 1/2″ or 9/16″ socket depending on your truck model. A tape measure helps verify proper rail positioning before final tightening.
All mounting hardware, clamps, and tools-specific instructions are included in the package. No cutting, drilling, or permanent modifications to your truck are required. Most owners have the necessary tools already in their garage or toolbox.