TruXedo Ford Ranger TruXport Tonneau Cover 247101
Our TruXedo Ford Ranger TruXport Tonneau Cover 247101 is engineered specifically for 2019-2024 Ford Ranger models with 5-foot beds. This soft roll-up tonneau cover combines weather-sealed protection with instant bed access, featuring a low-profile design that sits flush with your truck rails.
We built this cover with a tear-resistant MaxLife fabric top and a lightweight aluminum frame that installs in minutes without drilling. The dual-latch system locks securely at the tailgate, while the roll-up design lets you access your full bed whenever you need it.
- Fits 2019-2024 Ford Ranger with 5-foot bed (60-inch)
- MaxLife tear-resistant vinyl fabric with weather-sealed construction
- Low-profile design sits inside bed rails for sleek appearance
- Tool-free installation with clamp-on mounting system
- Dual-position Velcro straps hold cover open at mid-point or fully rolled
MaxLife Fabric & Aluminum Frame Construction
We manufacture the TruXedo Ford Ranger TruXport Tonneau Cover 247101 with our proprietary MaxLife fabric—a tear-resistant vinyl that stands up to UV exposure, rain, snow, and road debris. The fabric is stretched tight across six aluminum bows that create a smooth, taut surface over your truck bed.
The aluminum frame keeps the entire assembly lightweight at under 50 pounds, which makes installation and daily use effortless for one person. Each bow is powder-coated to resist corrosion, and the sealed side rails feature weather stripping that channels water away from your cargo. This same construction philosophy you’ll find across our TruXport tonneau cover lineup ensures consistent quality no matter which truck you drive.
Compatibility & Fitment for Ford Ranger
This tonneau cover is precision-engineered for 2019, 2020, 2021, 2022, 2023, and 2024 Ford Ranger trucks equipped with the 5-foot (60-inch) bed. The clamp-on rail system works with factory bed rails and is compatible with most bed liners, including spray-in and drop-in styles.
Before ordering, confirm your Ranger has the correct bed length—the TruXport 247101 will not fit the 6-foot bed option available on some Ranger configurations. The cover sits inside the bed rails rather than on top, preserving your truck’s low-profile appearance and allowing the tailgate to close and lock normally.
Installation & Clamp-On Mounting System
The TruXedo Ford Ranger TruXport Tonneau Cover 247101 installs in about 30 minutes with no drilling, cutting, or permanent modifications to your truck. Our clamp-on rail system uses adjustable clamps that tighten directly to your bed rails with a standard wrench or socket set.
We include detailed instructions and all necessary hardware in the box. The process involves positioning the side rails, securing the clamps, attaching the front header, and then rolling out the fabric cover and securing it with the dual-latch system at the tailgate. Once installed, the cover can be removed completely in seconds if you need to haul oversized cargo.
More TruXport Tonneau Covers for Your Truck
What people are saying
Common Questions About the Ford Ranger TruXport 247101
No, this cover is designed exclusively for 2019-2024 Ford Ranger trucks with the 5-foot (60-inch) bed. If your Ranger has the optional 6-foot bed, you’ll need a different TruXport model number.
Always measure your bed length from the inside of the bulkhead to the inside of the tailgate before ordering to confirm compatibility.
Yes, the TruXport 247101 is fully compatible with spray-in bed liners, drop-in liners, and bare truck beds. The clamp system accommodates bed liners up to 0.25 inches thick.
You won’t need to remove or modify your existing liner—the clamps grip securely over most liner materials without slipping.
The cover uses a dual-latch system at the tailgate that works with your Ranger’s factory tailgate lock. When you lock the tailgate, the cover cannot be opened from the outside.
While the soft fabric can be cut, the locking tailgate adds a layer of security that deters casual theft and keeps your cargo out of sight from passersby.
The cover is highly water-resistant but not 100% waterproof. The sealed side rails and weather stripping channel most rain and snow away from the bed interior, keeping cargo dry in typical weather conditions.
In extreme conditions like heavy rain with high winds or pressure washing, some moisture may enter the bed. We recommend using waterproof storage bins for items that must stay completely dry.
Most Ranger owners complete installation in 30 to 45 minutes using a standard wrench or socket set. No drilling, cutting, or special tools are required.
The process involves clamping the side rails to your bed rails, attaching the front header, and securing the fabric cover with the tailgate latches. Detailed instructions with photos are included in the box.
Yes, the entire truxedo ford ranger truxport tonneau cover 247101 can be removed in under two minutes once installed. Simply release the clamps and lift the assembled cover off the truck bed.
For everyday use, you can roll the cover open and secure it against the cab with Velcro straps, which gives you full bed access without removing anything.
We back the TruXport 247101 with a limited lifetime warranty that covers defects in materials and workmanship for as long as you own the original vehicle. This includes both the MaxLife fabric and the aluminum frame.
Normal wear from UV exposure and weathering over time is expected and does not affect warranty coverage for structural or functional defects.