TruXedo TruXport Tonneau Cover 279101
Our TruXport 279101 is engineered for truck owners who demand reliable bed protection without complicated installation. This soft roll-up tonneau cover fits select full-size pickup models and features our patented Secure-Lock™ rail system for weather-tight sealing along all four sides.
The dual-latch system allows single-person operation from either side of your truck bed, while the low-profile design maintains your vehicle’s sleek lines. Whether you’re hauling tools to the job site or protecting gear on weekend adventures, the TruXport 279101 delivers dependable coverage you can trust.
We’ve built this cover with tear-resistant vinyl that stands up to daily use and UV exposure. The roll-up design stores neatly at the front of the bed when you need full access, securing with hook-and-loop straps that keep it in place during transport.
- Fits select full-size pickup trucks with 6.5-foot or 8-foot bed lengths
- Tear-resistant MaxTex™ vinyl with UV and mildew protection
- Patented Secure-Lock™ rail system creates weather-tight seal on all four sides
- Dual-side access latches for one-person operation
- Low-profile design sits flush with bed rails (no additional height)
Secure-Lock Rail System & Weather Protection
The truxedo truxport tonneau cover 279101 features our proprietary Secure-Lock rail system that clamps directly to your truck’s bed rails without drilling. This creates a continuous seal along the perimeter of your bed, preventing water intrusion during rain storms and car washes.
Unlike generic snap covers that leave gaps, the TruXport’s tension-controlled design maintains constant pressure across the entire surface. The MaxTex vinyl material resists tearing and punctures while remaining flexible in freezing temperatures. Front and rear bow support bars prevent water pooling and maintain the cover’s aerodynamic profile.
Installation & Bed Compatibility
No-Drill Clamp-On Installation
We designed the TruXport 279101 for truck owners who want professional results without permanent modifications. The entire installation takes approximately 30 minutes using basic hand tools included in the package. The rail clamps adjust to fit variations in bed rail width and compensate for minor manufacturing tolerances.
This specific model (279101) is engineered for select pickup trucks with standard bed configurations. Before ordering, verify your truck’s year, make, model, and exact bed length against our fitment guide. The cover accommodates most bed liners and spray-in bedliner coatings without requiring removal.
Operating the Dual-Latch System
The truxedo truxport tonneau cover 279101 uses our EZ-Down™ latching mechanism on both driver and passenger sides for convenient single-person access. Each latch features a spring-loaded release that requires minimal hand pressure to disengage, even when wearing work gloves.
To open the cover, release both latches and roll the vinyl forward toward the cab. The integrated Velcro straps secure the rolled bundle against the front bow, keeping it in place at highway speeds. This takes about 15 seconds once you’re familiar with the motion.
More Truck Bed Protection Solutions
What people are saying
Questions About the TruXport 279101
Yes, the truxedo truxport tonneau cover 279101 is compatible with most drop-in bed liners and spray-in bedliner coatings. The rail clamps adjust to accommodate the additional thickness of bed liners without compromising the weather seal.
If you have a bed liner with stake pocket covers, you may need to trim them slightly for proper rail fitment. Our installation manual includes specific instructions for bed liner compatibility on page 4.
The TruXport 279101 can be rolled up and secured at the front of the bed to accommodate bed extenders, though you cannot use both simultaneously in the closed position. The cover is not compatible with most permanent ladder rack systems that mount to the bed rails, as these occupy the same mounting points.
For temporary ladder racks that mount inside the bed using stake pockets or over-the-rail systems, you’ll need to remove the cover to use the rack. We recommend our TruXedo Bed Rail System for integrated cargo management if you frequently need accessory mounting.
The 279101 model number corresponds to specific truck makes, models, years, and bed lengths. You’ll need to verify your exact vehicle specifications against our fitment chart before ordering.
Measure your bed length from the inside of the bulkhead (behind the cab) to the inside of the tailgate when closed. This model fits select trucks with either 6.5-foot or 8-foot bed configurations. Contact our fitment specialists with your VIN if you’re unsure about compatibility.
We provide a limited lifetime warranty on the aluminum frame components and plastic hardware against manufacturing defects and structural failure. The MaxTex vinyl cover carries a three-year warranty against premature weathering, UV damage, tearing, and seam separation under normal use.
The warranty does not cover damage from accidents, improper installation, or use with incompatible truck modifications. Register your truxedo truxport tonneau cover 279101 within 30 days of purchase using the card included in your package to activate full warranty coverage.
Yes, the TruXport 279101 is designed for full tailgate operation without removing the cover. The rear rail mounts flush with the tailgate edge, allowing the gate to swing open completely while the cover remains latched.
When you open the tailgate with the cover closed, the vinyl flexes slightly to accommodate the angle change. This is normal and does not damage the cover. For loading tall items, we recommend rolling up the entire cover rather than repeatedly opening the tailgate with it closed, as this reduces long-term stress on the vinyl.
The TruXport 279101 soft roll-up design offers easier storage when open and lighter overall weight compared to hard folding covers. You get complete bed access by rolling it forward, whereas hard folding covers typically stack at the front and reduce usable bed length by 10-12 inches.
Hard covers provide superior impact resistance and lockable security for valuable cargo. The TruXport is better suited for weather protection, improved aerodynamics, and frequent access. If you need maximum security, consider our TruXedo Sentry CT hard rolling cover instead.
Most truck owners report a 0.5 to 2 mpg improvement in highway fuel economy after installing the TruXport 279101. The low-profile design reduces aerodynamic drag by smoothing airflow over the bed, particularly at speeds above 55 mph.
Actual fuel savings vary based on your truck’s configuration, driving habits, and typical speeds. The aerodynamic benefit is most noticeable on highway commutes and long-distance driving, with minimal impact during city driving with frequent stops.