TruXedo TruXport Tonneau Cover for Ford F-150 (297701)
Our TruXport soft roll-up tonneau cover for the Ford F-150 combines lightweight construction with serious weather protection. Engineered specifically for 2015-2023 F-150 models with 5'7" beds, the 297701 installs in minutes without drilling and delivers instant bed security.
We designed this cover to balance everyday convenience with long-lasting durability. The soft vinyl face withstands UV exposure while the aluminum frame rails provide structural integrity that won't warp or fade. Whether you're securing tools for the worksite or protecting cargo on weekend adventures, the TruXport gives you reliable coverage that rolls open in seconds when you need full bed access.
- Custom fit for 2015-2023 Ford F-150 with 5'7" bed (67.1")
- Soft roll-up design with hook-and-loop closure system
- Powder-coated aluminum side rails mount to bed rails
- Low-profile design sits just 1 inch above bed rails
- No-drill clamp installation completes in under 30 minutes
Materials & Weather Protection Engineering
The TruXedo TruXport tonneau Ford F-150 297701 uses marine-grade vinyl that resists cracking in cold weather and fading under intense sun exposure. We reinforce the fabric edges with double-stitched seams that prevent fraying even after years of rolling and unrolling.
The powder-coated aluminum frame rails provide a corrosion-resistant foundation that maintains tension across the cover’s surface. This tension control system keeps water from pooling on top during rainstorms, channeling it off the sides instead of seeping through.
Ford F-150 Installation & Bed Compatibility
Clamp-On Mounting System
We engineered the 297701 model specifically for Ford F-150 trucks manufactured between 2015 and 2023 with the 5’7″ bed configuration. The side rails attach directly to your factory bed rails using heavy-duty clamps that require no drilling or permanent modifications.
Installation takes about 25 minutes with basic hand tools. You’ll position the rails along each bed side, tighten the clamps, and attach the vinyl cover using the pre-installed mounting hardware. The system works with or without a drop-in bed liner.
Roll-Up Operation & Bed Access
The TruXport cover rolls forward toward the cab, securing with heavy-duty straps behind the cab window. You can access your entire truck bed in under 20 seconds without removing any components or hardware.
We built the tension adjustment system into the side rails, letting you fine-tune the cover’s tightness as the vinyl settles during the first few weeks of use. Turn the adjustment knobs at each corner to eliminate any slack that develops.
Complete Your Ford F-150 Bed Protection Setup
What people are saying
Common Questions About the TruXport 297701
Yes, the TruXport 297701 works with spray-in bed liners on 2015-2023 Ford F-150 trucks with 5'7" beds. The clamp system attaches to your factory bed rails above the liner, and the side rails include enough adjustment range to accommodate the added thickness.
If you have an over-the-rail drop-in liner that sits on top of the bed rails, you'll need to ensure the liner's rail caps are narrow enough for the TruXport clamps to grip the factory rails underneath.
The TruXport cover will work with most over-the-rail toolboxes when the cover is rolled open toward the cab. However, you cannot have the cover fully closed while a toolbox spans across the bed rails.
Many F-150 owners install side-mount toolboxes that sit inside the bed against one wheel well, leaving the opposite bed rail clear for the tonneau cover to close properly. Crossover toolboxes that mount behind the cab can work if they're positioned far enough forward that the rolled cover doesn't contact them.
Each corner of the TruXport frame includes a tension adjustment knob built into the side rail. Turn these knobs clockwise to tighten the cover and counterclockwise to loosen it.
We recommend checking tension after the first week of use, as the vinyl material settles slightly during initial break-in. You want the cover tight enough to shed water without pooling, but not so tight that it's difficult to roll or latch. The adjustment takes about two minutes with no tools required.
The TruXport latches work in conjunction with your Ford F-150's factory tailgate lock. When your tailgate is locked, the tonneau cover's dual latches cannot be released from outside the truck.
This provides basic security against casual theft, but soft vinyl covers can be cut if someone is determined. For maximum bed security, we recommend our TruXedo Sentry hard rolling cover with its lockable aluminum slat design. The TruXport excels at weather protection and convenience while offering reasonable security for daily use.
We back the TruXport 297701 with a 3-year warranty covering defects in materials and workmanship. This includes the vinyl fabric, aluminum frame rails, mounting hardware, and latch mechanisms.
The warranty covers manufacturing defects but does not include damage from accidents, improper installation, or normal wear from UV exposure and weather. We also offer replacement parts individually if specific components wear out after the warranty period. Register your cover within 30 days of installation to activate full warranty coverage.
Yes, the TruXport is safe for automatic car washes when properly latched and tensioned. Ensure both tailgate latches are fully secured and the hook-and-loop closures along the sides are pressed firmly in place before entering.
We recommend touchless or soft-cloth car washes rather than older brush-style systems, as aggressive rotating brushes can potentially catch the cover's edge. Many F-150 owners with TruXport covers report regular car wash use with no issues when the cover is properly secured.
Clean the vinyl surface every 2-3 months with mild soap and water to remove road salt, dirt, and debris. Apply UV protectant spray twice per year if you park outdoors regularly to prevent premature fading and cracking.
Check the clamp bolts and tension adjusters every six months to ensure nothing has loosened from road vibration. Lubricate the latch mechanisms annually with silicone spray. Avoid using harsh chemicals, petroleum-based cleaners, or abrasive scrub brushes that can damage the vinyl coating. With basic care, the TruXport will provide years of reliable bed protection.