TruXport Tonneau Cover Ram 1500
Our TruXport tonneau cover for Ram 1500 trucks combines secure cargo protection with effortless access when you need it most. This soft roll-up cover installs in minutes with no drilling required, fitting 2009-2025 Ram 1500 models with 5'7", 6'4", and 8' beds.
The low-profile design sits flush with your truck bed rails, improving aerodynamics and fuel efficiency while keeping rain, snow, and road debris away from your cargo. When you need full bed access, the cover rolls up and secures with integrated straps at the cab, and unrolls just as easily when you're ready to lock down your load.
We built this cover with a vinyl-coated fabric that resists tearing and UV fade, supported by aircraft-grade aluminum bows that won't rust or corrode. The dual-latch rail system locks at multiple positions along the bed, giving you flexible partial access or complete coverage depending on your haul.
- Fits 2009-2025 Ram 1500 with 5'7", 6'4", and 8' bed lengths
- Vinyl-coated MaxTrax fabric resists UV, water, and abrasion
- Aircraft-grade aluminum bows and rails for lightweight strength
- No-drill clamp-on installation in under 30 minutes
- Dual-position latching system for partial or full bed access
Materials & Weather Protection
The TruXport tonneau cover for Ram 1500 features our MaxTrax fabric, a tear-resistant vinyl with a textured matte finish that won’t crack or fade under relentless sun exposure. We coat both sides of the fabric to create a moisture barrier that sheds rain and snow while remaining flexible in sub-zero temperatures.
The aluminum bow framework distributes tension evenly across the fabric, preventing sagging and pooling water during storms. Sealed seams along the edges and industrial-strength stitching at stress points ensure the cover stays watertight even during highway speeds and heavy downpours.
Installation & Bed Compatibility
No-Drill Clamp Installation
Our truxport tonneau cover ram 1500 system mounts directly to your truck bed rails using heavy-duty clamps that grip the rail edges without drilling or permanent modification. You’ll align the side rails along the bed, hand-tighten the clamps, and tension the fabric in about 30 minutes with basic hand tools.
Ram 1500 Bed Size Fitment
We offer three bed length configurations: the 5’7″ short bed, 6’4″ standard bed, and 8′ long bed. Each version is precision-cut to sit flush with your Ram’s bed rails and tailgate, maintaining clearance for stake pockets and tie-down anchors.
Roll-Up Access & Locking System
When you need to load tall cargo or access the full bed, release the tailgate latches and roll the cover forward toward the cab in seconds. Integrated hook-and-loop straps cinch the rolled cover into a compact bundle that stays secure at highway speeds, giving you unobstructed access to the entire bed.
The dual-position latching rails let you lock the cover at any point along the bed length, so you can secure the front half while leaving the rear open, or vice versa. Each latch engages with a rotary paddle that requires deliberate action to release, deterring casual theft while remaining easy to operate with gloves.
More Soft Roll-Up Tonneau Covers
What people are saying
Common Questions About the TruXport for Ram 1500
No, the standard TruXport for Ram 1500 is designed for trucks without the RamBox bed storage system. The RamBox rails create a different bed rail profile that requires a cover specifically engineered for that configuration.
If your Ram has factory RamBox bins, you'll need a tonneau cover model that accommodates the wider rail spacing and integrated storage compartments.
Yes, the TruXport tonneau cover for Ram 1500 works with most bed extenders and fold-down tailgate steps as long as they don't interfere with the rear latch rail. You can operate the cover normally when these accessories are stowed.
When using a bed extender in the deployed position, you'll need to roll up the cover fully to access the extended cargo area. The cover cannot close over an active bed extender without modification.
The truxport tonneau cover ram 1500 provides excellent water resistance for typical driving and weather conditions, shedding rain and snow effectively during daily use. The vinyl fabric and sealed seams prevent the majority of moisture from entering the bed.
However, soft roll-up covers are not 100% waterproof like hard folding or retractable models. During extreme storms or pressure washing, minor moisture may enter through the tailgate seal. We recommend using waterproof storage bags for electronics or documents if you expect severe weather exposure.
Yes, the TruXport clamp system accommodates spray-in bed liners up to 1" thick, including popular brands like Line-X, Rhino Linings, and Herculiner. The adjustable clamp height lets you tighten the rails over the added liner thickness.
Drop-in plastic bed liners also work as long as the liner doesn't extend above the bed rail height. If your liner has raised side rails, measure the clearance before ordering to ensure proper fit.
Measure from the inside of the bulkhead (behind the cab) to the inside of the tailgate with the tailgate closed. A 5'7" bed measures approximately 67 inches, a 6'4" bed measures about 76 inches, and an 8' bed measures roughly 96 inches.
You can also check your Ram's window sticker or owner's manual for the factory bed designation. Most 2009-2025 Ram 1500 quad cabs have the 6'4" bed, crew cabs typically come with the 5'7" bed, and regular cabs often feature the 8' long bed.
We recommend avoiding automatic car washes with the TruXport tonneau cover installed, as the high-pressure brushes and chemical sprays can stress the fabric and latch mechanisms over time. The aggressive mechanical action may also loosen the clamps.
For best results, wash your truck and cover by hand with mild soap and a soft brush. If you prefer automated washing, consider a touchless car wash that uses only water jets and air dryers without physical contact.
We offer a 30-day satisfaction guarantee on all TruXport tonneau covers. If the cover doesn't fit your Ram 1500 as described or you're not satisfied with the quality, contact our support team to initiate a return for a full refund.
The cover must be in new, unused condition with all original hardware and packaging. Return shipping is the customer's responsibility unless the fitment issue resulted from an error on our part.